First, you need to strip the old finish. You can use chemical strippers that are available at home improvement stores. You should follow the manufacturer’s instructions and ensure that the area is properly ventilated. Once you’ve removed the old finish, you can sand the surface with an 80 to 120-grit sandpaper. After you’ve completed the sanding process, wipe the table dry.
Next, you should apply a stain or varnish to the surface. This will enhance the natural wood features while adding a protective layer. No matter what kind of wood you have, the process is the same. You should use the right type of stain for the table. The type of wood will also determine the type of refinishing that will work best.
Next, you should apply a gel stain to the wood surface. Allow this to dry for about 36 hours. Then, you can apply a top coat. This will protect the table from damage. After the first coat is dry, you can apply a second coat. If the finish is thick, you may need to repeat the process a few times.
Refinishing a dining table can be an enjoyable and inexpensive hobby for those with the right tools. Just remember to prepare the surface thoroughly and follow manufacturer’s instructions. To begin, you need to remove any loose particles or debris from the surface of the table. Sanding the table is a vital step and should be done using a fine-grit sandpaper.
Before sanding and staining the table top, clean it thoroughly with a soft cloth. You may use painter’s tape to cover the table top while you work on the staining process. You will need to apply two coats of primer and two coats of paint. To stain the table, you will need a pre-stain conditioner like Minwax. Make sure to let the stain dry before applying a sealer.
After sanding the table, you’ll need to remove any remaining stain using 150-grit sandpaper or a palm sander. You may also need to use fine steel wool to remove any remaining paint or varnish. If the table has a veneer, you’ll need to apply a different finish for it.
Wood stains are a great way to change the appearance of your table. They also help highlight the grain of the wood. Depending on the type of wood, staining can change the overall color of the table. It’s important to apply stain evenly to prevent blotches. A stain can be applied in several thin layers and should dry thoroughly between each one. Once the stain has dried completely, you can apply a protective clear-coat finish.
Refinishing a dining table can be a very cost-effective way to improve the appearance of your furniture. It’s generally cheaper than replacing the entire set. If it’s heavily damaged, you may even be able to get it at a cheaper price than you would if you had bought it new.